Svantek SV 104BIS, User Manual

Page: 102 / 180

102
SV 104BIS User Manual
#7,SE;
Reserved.
#7,SF;
Reserved.
#7,SL;
This function returns all statistical levels in the format
#7,SL,sl1,sl2,sl3,sl4,sl5,sl6,sl7,sl8,sl9,sl10;
#7,SL,sl_index,sl_level;
This function sets statistical levels where sl_index is the statistical index,
sl_level
is the statistical level and returns the following sequence of
characters: #7,SL;
This function is not accepted while the instrument is in the RUN state.
#7,SN;
Get last loaded setup file name;
Response format: #7,SN,name;
where: name
–
setup file name.
#7,SP;
Reserved.
#7,SS;
This function creates setup file based on the current settings. The function returns
#7,SS;
This function is not accepted while the instrument is in the RUN state.
#7,ST;
Get Standby Delay.
Response format: #7,ST,xxx;
where: xxx
–
time to standby in [s].
#7,ST,x; Set Standby Delay.
where: xxx
–
time to standby in [s].
Response format: #7,ST;
This function is not accepted while the instrument is in the RUN state.
#7,TC;
This function returns TEDS calibration factor;
#7,TF;
This function returns TEDS factory calibration factor;
#7,TP;
Get temperature.
Response format: #7,TP,xx.x;
where: xx.x
– temperature in [˚C].
#7,TS;
#7,TT;
This function returns microphone serial number saved in TEDS memory.
This function returns type of microphone saved in TEDS memory. Value of -1 means
unknown TEDS, value of 27 means SV27 microphone;
#7,TU;
This function upload calibration factor to microphone’s TEDS me
mory.
This function is not accepted while the instrument is in the RUN state.
#7,UF; This function returns USB speed in the format #7,UF,x;
#7,UF,x; This function sets USB full speed (12Mbps, x = 1 ) or sets usb high speed (480Mbps,
x = 0 ) and returns the following sequence of characters:
#7,UF;
This function is not accepted while the instrument is in the RUN state.
#7,UN;
This function returns unit name;