Svantek SV 104BIS, User Manual

Page: 50 / 180

50
SV 104BIS User Manual
5.3.2 Results view / control screen
The result view/control screen enables you viewing measured results of the particular instrument and
controlling the measurement.
From this screen, you can Pause, Start or Stop a measurement run tapping the appropriate icon on the
measurement control bar. Stopping the measurement run requires confirmation.
Figure 5-4 Assistant results review and pause/start/stop screen
As in the scanning/status screen the same icons in the upper screen line describe the instrument status. In
addition to them, the integration time is displayed.
Integration time . If the measurement is in progress, the field turns green
and time shows the elapsed measurement time. If the measurement is
stopped or paused, the field turns red or yellow, and the time change will be
stopped.
You can also navigate thru the acoustic profiles (Chapter 3.9 ) by
pressing certain tab at the top of the screen with profile’s names, defined
in the setup.
You can change the Time to full DOSE parameter within Assistant application by pressing its bar on the
screen.