Svantek SV 104BIS, User Manual

Page: 70 / 180

70
SV 104BIS User Manual
6.4 W
ORKING WITH DATA FILES
6.4.1 Downloading files
In order to download files from the connected Svantek instrument(s), open the Download tab in the Instrument
window.
The Download
panel contains a list of files stored in the instrument’s memory in the form of a table. Various
types of files are displayed there, e.g., measurement files, wave files, etc. The first three columns of the table
contain basic information about the files: name, size in bytes and date of creation. The last three columns
contain additional information (concerning location, users and tasks) assigned to files. Files that have not yet
been downloaded are displayed with bold font.
Figure 6-24 SV 104BIS Download window
To download files, use the
Download button located below the files table on the left side of the Download
panel. If one or more files are selected in the table, pressing the Download button will cause the download of
the selected files. Otherwise, pressing this button will cause the download of all of the files stored on the
connected instrument.
Note: You can select files by clicking a row of the table. Clicking with the CTRL or SHIFT button pressed allows
to select multiple files.
Note: You can download individual files by double-clicking on them.
Files from the instrument are downloaded to the special internal Supervisor catalogues that are created
automatically in the parent catalogue with the name “Catalogue”. Created
catalogues by default have names
of the instruments, for example, SV 104B, SV 104BIS, etc.
After the downloading procedure is completed, a window, containing information about success or failure of
downloading, is shown.
Files that have not yet
been downloaded are
displayed with bold
font.
Select files on this list and
press this button to download
files from the connected
instrument to the Supervisor’s
database.