Svantek SV 104BIS User Manual Download Page 48

Page: 48 / 180

104BIS User Manual

5.3

ONTROL VIA

LUETOOTH

The Assistant application has two main screens: scanning/status screen and result view/control screen.

Tapping the fields inside the ins

trument frame you can go to the instrument’s results view and measurement

control screen.

Figure 5-3

Changing main view screens

If you wish to come back to the

scanning/status screen just press the “Exit” button on your mobile device.

5.3.1

Instruments’ status screen

In the scanning/status screen you may observe the state of a set of instruments.

Each instrument status is displayed in the frame that contain up to tree fields. First field displays the instrument

name and serial number. Instrument’s unique name can be defined via Assistant and also via the Supervisor

software (Chapter

6.2

). Second field shows the instrument status (

Turned off

) or if it is turned on

–

the

measurement status. If the measurement is stopped the field is red, if in progress it is green, if in pause

–

yellow.

The third field contains several icons that inform you about:

Summary of Contents for SV 104BIS




















































































































































































Search results

Summary of Contents for SV 104BIS

Reviews:

Related manuals for SV 104BIS

Brands by name

Popular brands

Svantek SV 104BIS, User Manual

Search results

Summary of Contents for SV 104BIS

Reviews:

Related manuals for SV 104BIS

Brands by name

Popular brands