Svantek SV 104BIS, User Manual

Page: 65 / 180

65 SV 104BIS User Manual
6.3.9.1 Calibration
Sometimes it is required to perform so called post-calibration of the instrument. The Post Calibration position
enables the user to perform additional calibration after a measurement session and add the results to the file
saved in the memory. In the panel below, there are three options for saving results: not to save
“Off”
, save in
the last file
“Last File”
or save in the files which will be created after last calibration (
“Files after last
calibration”
). Auto-calibration can be disabled if required for any reason.
Figure 6-17 Calibration settings panel
6.3.9.2 Statistical levels
In the Statistical Level panel, it is possible to define ten percentile statistical levels, named from N1 to N10.
The default statistical levels have the following settings: 1, 10, 20, 30, 40, 50, 60, 70, 80 and 90. All values
have to be within the integer range [1, 99]. Each value can be set independently from the others.
Figure 6-18 Statistical levels settings panel
6.3.9.3 Keyboard security
The security setting enables you to protect access to the instrument when in use with a simple keypad
password to prevent users from inadvertently terminating a measurement run. This feature is set through
the
Supervisor
’s
“General”
settings tab.