19
GETTING STARTED
3.3 STANDBY MODE
Long tap the control element the
system gets into
Standby
mode. In
this mode, the display is switched off
and audio is unavailable.
When in Display OFF/Standby modes,
short tap to activate the system.
3.4 MANAGE SETTINGS
You can change the following settings
of the system:
z
System Settings
z
Audio Settings
z
Tuner (Radio) Settings
z
Connectivity Settings
3.4.1 A
CCESSING
S
ETTINGS
To access the settings screens,
perform the following steps:
1. Tap control element on the
system.
In the
Home screen
: The system
displays the
System Settings
screen
.
In other screens: The system
displays the respective settings
screen.
3.5 MANAGE SYSTEM
SETTINGS
Using the various System Settings
options, you can perform the following
actions:
z
Handle the system display settings
z
Set /Change system date and time
details
z
Enable/disable vehicle alerts
z
Lock/unlock the system keypad
while driving
z
Enable/disable list scrolling
through SWC
NOTE:
i
The date and time will be dis-
played in the Display OFF
mode only if the “Show Time
and Date During Display OFF”
option is enabled in the System
Settings.
NOTE:
i
In Standby mode, the system
will drain the battery when the
vehicle engine is not running.
NOTE:
i
When you switch the vehicle
ignition lock from ACC to OFF,
while the device is in standby
mode, it will remain in standby
mode. When you switch the
ignition lock to ACC again, if
you tap , the
Home screen
will open.
