Suzuki UG110 2021, Service Manual

Page: 90 / 198

4-14 FUEL AND LUBRICATION SYSTEM
• Remove the carburetor heater
1
.
• Remove the float chamber
2
.
• Remove the float pin
3
, float
4
and needle valve
5
.
• Remove the main jet
6
, needle jet
7
and pilot jet
8
.
5
Do not use wire to clean the passages and jets. Only use
compressed air.
• Remove the throttle stop screw
9
and air screw
0
.
NOTE:
Before removing the air screw
9
, its setting must be determined.
Slowly turn the air screw clockwise and count the number of turns
until it is lightly seated.
When reassembling the air screw, you will want to set it to its
original position.