Suzuki UG110 2021, Service Manual, Page: 170 / 198

ELECTRICAL SYSTEM 6-29
SPECIFICATIONS
Type designation FTX5L-BS
Capacity 12 V, 14.4 kC (4 Ah)/10 HR
INITIAL CHARGING
FILLING ELECTROLYTE
• Remove the aluminum tape
1
which seals the battery filler
holes.
• Remove the caps
2
from the electrolyte container.
NOTE:
* Do not remove or pierce the sealed areas
3
of the electrolyte
container.
* After completely filling the battery with electrolyte, use the caps
2
from the electrolyte container to seal the battery filler holes.
• Insert the nozzles of the electrolyte container
4
into the elec-
trolyte filler holes of the battery. Hold the electrolyte container
firmly so that it does not fall. Do not allow any of the electrolyte
to spill.
• Make sure that the air bubbles rise to the top of each electro-
lyte container and leave the electrolyte container in this posi-
tion for more than 20 minutes.