Suzuki IGNIS Series 2016 Owner'S Manual Download Page 185

Page: 185 / 467

3-34

OPERATING YOUR VEHICLE

75RM0-01E

NOTE:

• For manual transaxle vehicle, the gear-

shift indicator is not indicated when the

gear position is in “N” (Neutral).

• For manual transaxle vehicle, if you

depress the clutch pedal while UP/

DOWN arrow is indicated, the indication

will disappear.

• For Auto Gear Shift vehicle, if you

release your foot from the accelerator

pedal while UP arrow is indicated, the

indication will display the currently

selected gear position.

• The indication of gearshift indicator tim-

ing may differ depending on the vehicle

condition and/or driving situation even in

the same vehicle speed and engine rev-

olution.

• If any of the electrical systems such as

the dual camera brake support or the

ESP

(if equipped) is working, the gear-

shift indicator will disappear temporarily.

Example of the gearshift indicator
Manual transaxle

Auto Gear Shift (when using the manual mode)

Indication

Description

Lower gear position is selected for the vehicle speed and/

or engine revolution. Changing to a higher gear position is

recommended.

Higher gear position is selected for the vehicle speed

and/or engine revolution. Changing to a lower gear posi-

tion is recommended.

Indication

Description

Lower gear position is selected for the vehicle speed and/

or engine revolution. Changing to a higher gear position is

recommended.

• In this case, shifting up 5th or upper gear position is

recommended.

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands