Suzuki IGNIS Series 2016 Owner'S Manual Download Page 3

Page: 3 / 467

75RM0-01E

FOREWORD

This manual should be considered a per-

manent part of the vehicle and should

remain with the vehicle when resold or oth-

erwise transferred to a new owner or oper-

ator. Please read this manual carefully

before operating your new SUZUKI vehicle

and review the manual from time to time. It

contains important information on safety,

operation and maintenance.

All information in this manual is based

on the latest product information avail-

able at the time of publication. Due to

improvements or other changes, there

may be discrepancies between informa-

tion in this manual and your vehicle.

SUZUKI MOTOR CORPORATION

reserves the right to make production

changes at any time, without notice and

without incurring any obligation to

make the same or similar changes to

vehicles previously built or sold.

This vehicle may not comply with stan-

dards or regulations of other countries.

Before attempting to register this vehi-

cle in any other country, check all appli-

cable regulations and make any

necessary modifications.

NOTE:

Please see the warning label named “Air

bag symbol meaning” in the “BEFORE

DRIVING” section for information on front

air bag protection.

NOTE:

(For Hong Kong models)

• “ENG A-STOP System” means Idling

Stop System.

• “SHVS (Smart Hybrid Vehicle by

Suzuki)” means Mild Hybrid.

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands