Suzuki IGNIS Series 2016 Owner'S Manual Download Page 278

Page: 278 / 467

5-25

OTHER CONTROLS AND EQUIPMENT

75RM0-01E

Maintenance

If you do not use the air conditioner for a

long period, such as during winter, it may

not give the best performance when you

start using it again. To help maintain opti-

mum performance and durability of your air

conditioner, it needs to be run periodically.

Operate the air conditioner at least once a

month for one minute with the engine

idling. This circulates the refrigerant and oil

and helps protect the internal components.
If your air conditioner is equipped with air

filters, clean or replace them as specified

in “Maintenance schedule” in the

“INSPECTION AND MAINTENANCE” sec-

tion.

(For vehicles using “HFO-1234yf” refrig-

erant)

NOTE:

Your vehicle uses the air conditioning

refrigerant HFO-1234yf, commonly called

R-1234yf. R-1234yf replaced R-134a for

automotive applications. Other refriger-

ants are available, but only R-1234yf

should be used in your vehicle.

(Except for vehicles using “HFO-1234yf”

refrigerant)

NOTE:

Your vehicle uses the air conditioning

refrigerant HFC-134a, commonly called

R-134a. R-134a replaced R-12 around

1993 for automotive applications. Other

refrigerants are available, including recy-

cled R-12, but only R-134a should be used

in your vehicle.

NOTICE

Using the wrong refrigerant may

damage your air conditioning sys-

tem. Use R-1234yf only. Do not mix or

replace the R-1234yf with other refrig-

erants.

NOTICE

Using the wrong refrigerant may

damage your air conditioning sys-

tem. Use R-134a only. Do not mix or

replace the R-134a with other refrig-

erants.

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands