Suzuki IGNIS Series 2016 Owner'S Manual Download Page 111

Page: 111 / 467

2-90

BEFORE DRIVING

75RM0-01E

Vehicle with ENG A-STOP system

Warning and indicator

message

Master warning

indicator light

Sound

Cause and remedy

75RM269

Off

The engine does not stop automatically by the

ENG A-STOP system, because any of the auto

stop conditions is not met.

Refer to “ENG A-STOP system (engine auto

stop start system)” in the “OPERATING YOUR

VEHICLE” section for details.

75RM270

Off

By certain conditions, some

kind of sound you will hear

from interior of the vehicle.

The engine stalls. Restart the engine by turning

the ignition switch or pressing the engine

switch.

Refer to “ENG A-STOP system (engine auto

stop start system)” in the “OPERATING YOUR

VEHICLE” section for details.

75RM271

Off

Beep (one time from interior

buzzer)

The engine will restart soon, because the bat-

tery continues to be discharged, some time has

passed since the engine was stopped automat-

ically, the temperature of the air from the outlets

changes greatly or the defroster is turned on.

Refer to “ENG A-STOP system (engine auto

stop start system)” in the “OPERATING YOUR

VEHICLE” section for details.
Also, the duration time of the ENG A-STOP

system, depending on using the air conditioning

system can be set. Refer to “Setting mode” in

this section.

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands