Suzuki IGNIS Series 2016 Owner'S Manual Download Page 144

Page: 144 / 467

2-123

BEFORE DRIVING

75RM0-01E

Turn signal operation

With the ignition switch in “ON” position or

the ignition mode ON, move the lever

upward or downward to activate the right

or left turn signals.

Normal turn signal

68PM00234

Move the lever all the way upward or

downward to signal. When the turn is com-

pleted, the signal will cancel and the lever

will return to its normal position.

Lane change signal

68PM00235

Move the lever partway upward or down-

ward to turn right or left and hold the lever

in the moved position.

• The turn signal and its indicator flash

while the lever is held at the moved posi-

tion.

The turn signal and its indicator flash 3

times even if you return the lever immedi-

ately after moving it.

NOTE:

The turn signal and its indicator can be set

whether they flash 3 times after the turn

signal lever is returned via the information

display. Refer to “Information display” in

this section.

NOTE:

You can customize the setting for the num-

ber of flashing times of the turn signal and

its indicator (1 to 4 times). Please ask an

authorized SUZUKI dealer for the customi-

zation.

EXAMPLE

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands