Suzuki IGNIS Series 2016 Owner'S Manual Download Page 251

Page: 251 / 467

4-6

DRIVING TIPS

75RM0-01E

54G638S

WARNING

In addition to following the driving

tips in this section, it is important to

observe the following precautions.

• Check that your tires are in good

condition and always maintain the

specified tire pressure. Refer to

“Tires” in the “INSPECTION AND

MAINTENANCE” section for

details.

(Continued)

WARNING

(Continued)

• Do not use tires other than those

specified by SUZUKI. Never use dif-

ferent sizes or types of tires on the

front and rear wheels. For informa-

tion regarding the specified tires,

refer to the tire information label

located on the driver’s door lock

pillar.

• Never use oversized tires or spe-

cial shock absorbers and springs

to raise (jack up) your vehicle. This

will change the handling character-

istics. Oversized tires may also rub

against the fender over bumps,

causing vehicle damage or tire fail-

ure.

• After driving through water, test the

brakes while driving at a slow

speed to see if they have main-

tained their normal effectiveness. If

the brakes are less effective than

normal, dry them by repeatedly

applying the brakes while driving

slowly until the brakes have

regained their normal effective-

ness.

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands