Suzuki IGNIS Series 2016, Owner'S Manual

Page: 190 / 467

3-39
OPERATING YOUR VEHICLE
75RM0-01E
Precautions of when the engine is stopped automatically
WARNING
Do not perform any of the following operations while the engine has been stopped automatically. This may result in an acci-
dent.
Operation/Vehicle Condition Solution
Common
Engine hood opened
• The interior buzzer sounds intermittently.
• After the engine is stopped automatically, it stalls.
• The ENG A-STOP indicator light (green) goes off.
To restart the engine, follow the procedure below.
1) Set the parking brake firmly, and then place the gearshift lever in
the “N” position (for manual transaxle) or “P” position (for CVT).
2) Securely close the engine hood.
3) Turn the ignition switch or press the engine switch to restart
the engine.
Manual
transaxle
Driver’s seat belt unfastened or driver’s door opened
• The interior buzzer sounds 10 times.
• The engine is restarted automatically.
• The ENG A-STOP indicator light (green) blinks 5
times, then goes off.
Fasten the driver’s seat belt and/or close the driver’s door.
Gearshift lever shifted to a position other than “N”
without depressing the clutch pedal, driver’s seat belt
unfastened and driver’s door opened
• The interior buzzer sounds intermittently.
• After the engine is stopped automatically, it stalls.
• The ENG A-STOP indicator light (green) goes off.
To restart the engine, follow the procedure below.
1) Set the parking brake firmly, and then place the gearshift lever
in the “N” position.
2) Close the door and buckle the seat belt.
3) Turn the ignition switch or press the engine switch to restart
the engine.
CVT
Driver’s seat belt unfastened, or driver’s door opened
• The interior buzzer sounds 10 times.
(for approximately 5 seconds).
• The engine is restarted automatically.
• The ENG A-STOP indicator light (green) blinks 5
times, then goes off.
Before driving, close the door and buckle the seat belt. In addi-
tion, before getting out of the vehicle, follow the procedure below.
1) Set the parking brake firmly, and then place the gearshift lever
in the “P” position.
2) When the vehicle will be stopped for a long time or when you
will leave the vehicle unattended, press the engine switch to
stop the engine.