Suzuki IGNIS Series 2016 Owner'S Manual Download Page 213

Page: 213 / 467

3-62

OPERATING YOUR VEHICLE

75RM0-01E

• When you want to turn off the system,

push and hold the dual camera brake

support OFF switch (1) until the interior

buzzer beeps and the dual camera

brake support OFF indicator light (2)

comes on.

Perform the following method to turn the

system back on.

• Push and hold the dual camera brake

support OFF switch (1) until the interior

buzzer beeps and the dual camera

brake support OFF indicator light (2)

goes off.

• Turn off the engine and then turn it on

again.

Lane departure warning OFF switch

You can turn off the lane departure warning

and the vehicle swaying warning.

75RM309

• When you want to turn off the system,

push and hold the lane departure warn-

ing OFF switch (1) until the interior

buzzer beeps and the lane departure

warning OFF indicator light (2) comes

on.

Perform the following method to turn the

system back on.

• Push and hold the lane departure warn-

ing OFF switch (1) until the interior

buzzer beeps and the lane departure

warning OFF indicator light (2) goes off.

NOTE:

Once the system is turned off, it does not

turn on automatically, even if you turn off

the engine and then start the engine again.

To turn the system back on, push the

switch again.

WARNING

If you attempt to press the dual cam-

era brake support OFF switch while

driving, you could lose control of the

vehicle.

Do not press the dual camera brake

support OFF switch while driving.

(2)

(1)

WARNING

If you attempt to press the lane

departure warning OFF switch while

driving, you could lose control of the

vehicle.

Do not press the lane departure warn-

ing OFF switch while driving.

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands