Suzuki IGNIS Series 2016 Owner'S Manual Download Page 209

Page: 209 / 467

3-58

OPERATING YOUR VEHICLE

75RM0-01E

Brake assist system

When you are operating at speeds

between approximately 10 km/h to 120 km/

h (6 mph to 75 mph) and there is a high

probability of a frontal crash, the brake

assist system provides more powerful

braking when you slam down on the brake

pedal. When the brake assist system

works, the frontal collision warning also

works at the same time.

75RM286

Automatic brake system

When a frontal crash is judged to be

unavoidable at a speed of approximately

120 km/h (75 mph) or under, the brakes

will powerfully operate automatically.

• When the automatic brake system is

activated at a speed of approximately

50 km/h (31 mph) or under toward the

vehicle in front of you (or toward the

pedestrian, approximately 30 km/h (19

mph) or under), crashes may be avoid-

able.

• While the automatic brake system is

working, the interior buzzer will intermit-

tently beep, the dual camera brake sup-

port indicator light will blink rapidly, the

indication on the information display will

appear, and the brake lights will be

turned on.

75RM287

NOTE:

The indication on the information display

and the dual camera brake support indica-

tor light will go off after 3 seconds from

being released the automatic brake sys-

tem.

with tachometer

without

tachometer

Information display

with tachometer

without

tachometer

Information display

Indicator

light

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands