Suzuki IGNIS Series 2016 Owner'S Manual Download Page 315

Page: 315 / 467

5-62

OTHER CONTROLS AND EQUIPMENT

75RM0-01E

Playing mode selection

1) Press the button numbered [6] of PRE-

SET buttons (8) for 1 second or longer.

2) Turn “TUNE/FLD PUSH SOUND” knob

(2).

Each time the knob is turned, the mode

will change as follows:

3) Press “TUNE/FLD PUSH SOUND”

knob (2) to select the desired mode.

NOTE:

• When the button numbered [6] of PRE-

SET buttons (8) is pressed, the previous

mode will be displayed.

Notes on iPod

Supported iPod

• iPod

touch (6th generation)

• iPod

touch (5th generation)

• iPod

touch (4th generation)

• iPod

touch (3rd generation)

• iPod

touch (2nd generation)

• iPod

touch (1st generation)

• iPod

classic

• iPod

nano (7th generation)

• iPod

nano (6th generation)

• iPod

nano (5th generation)

• iPod

nano (4th generation)

• iPod

nano (3rd generation)

• iPod

nano (2nd generation)

• iPod

nano (1st generation)

• iPod

(5th generation)

• iPhone

6S Plus

• iPhone

6 Plus

• iPhone

3GS

• iPhone

* Some functions may not be available

depending on the model of iPod

* iPod

is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

* iPhone

is a trademark of Apple Inc.,

registered in the U.S. and other coun-

tries.

* Apple is not responsible for the opera-

tion of this device or its compliance with

safety and regulatory standards.

iPod

connection

• Make sure to detach the iPod

after

turning the ignition switch to “LOCK”

position or pressing the engine switch to

change the ignition mode to LOCK

(OFF). The iPod

may not be shut down

when it is being connected and may

result in battery depletion.

• Do not connect iPod

accessories such

as an iPod

remote control or head-

phones while connecting the iPod

with

the unit. The unit may not operate cor-

rectly.

PLAYLIST

ARTIST

ALBUM

SONGS

PODCAST

GENRE

AUDIOBOOK

Summary of Contents for IGNIS Series 2016




















































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands

Suzuki IGNIS Series 2016, Owner'S Manual

Search results

Summary of Contents for IGNIS Series 2016

Reviews:

Related manuals for IGNIS Series 2016

Brands by name

Popular brands