2-32
RIGHT HANDLEBAR
ENGINE STOP SWITCH
1
“
” position
The ignition circuit is off. The engine
cannot start or run.
“
” position
The ignition circuit is on and the
engine can run.
FRONT BRAKE LEVER
2
The front brake is applied by squeez-
ing the brake lever gently toward the
throttle grip. This motorcycle is
equipped with a disk brake system
and excessive pressure is not
required to slow the machine down
properly. The brake light will be lit
when the lever is squeezed inward.
Front Brake Lever Adjustment
The distance between the throttle grip
and the front brake lever is adjustable
to 6 positions. To change the position,
push the brake lever forward and turn
the adjuster to the desired position.
When changing the brake lever posi-
tion, always be sure the adjuster
stops in the proper position; a projec-
tion of the brake lever pivot should fit
into the depression of the adjuster.
This motorcycle is delivered from the
factory with its adjuster set on posi-
tion 3.
METER
WARNING
Adjusting the front brake lever
position while riding can be haz-
ardous. Removing a hand from the
handlebars can reduce your ability
to control the motorcycle.
Never adjust the front brake lever
position while riding. Keep both
hands on the handlebars.
Summary of Contents for GSX-R1000/A
