2-15
Reserve trip meter
The reserve trip meter counts dis-
tance from fuel tank reserve point
until the fuel tank is refilled. The fuel
level indicator starts blinking and the
reserve trip meter starts counting
when the fuel level reaches the
reserve point. The trip meter will be
reset to zero automatically when the
fuel tank is refilled over halfway and
the motorcycle starts moving. The
reserve trip meter can be reset manu-
ally by pushing the ADJ button
1
or
METER
or METER
for more
than 5 seconds with fuel tank filled
over halfway.
Clock
The clock has a 12-hour display. Fol-
low the procedure below to adjust the
clock.
1. Press and hold the SEL button
B
for 3 seconds until the hour dis-
play blinks.
2. Adjust the hour display by pushing
the ADJ button
1
.
NOTE: When the ADJ button
1
is
held in, the display advances continu-
ously.
3. Push the SEL button
B
or
METER
or METER
to high-
light the minute display.
4. Adjust the minute display by push-
ing the ADJ button
1
.
5. Push the SEL button
B
or
METER
or METER
to return
to the clock mode.
Instrument panel light brightness
Pushing the ADJ button
1
will
change the instrument panel light
brightness in 5 steps. The brightness
indicator indicates brightness from
“
” (min) to “
” (max).
WARNING
Changing the display while riding
can be hazardous. Removing a
hand from the handlebars can
reduce your ability to control the
motorcycle.
Never change the display while
riding. Keep both hands on the
handlebars.
Summary of Contents for GSX-R1000/A
