2-29
LEFT HANDLEBAR
CLUTCH LEVER
1
The clutch lever is used for disengag-
ing the drive to the rear wheel when
starting the engine or shifting trans-
mission gears. Squeezing the lever
disengages the clutch.
DIMMER SWITCH
2
“
” position
The headlight low beam and taillight
turn on.
“
” position
The headlight high beam, headlight
low beam and taillight turn on. The
high beam indicator light also turns
on.
Headlight flasher switch
Press the dimmer switch of “
” posi-
tion to flash the headlight high beam.
HAZARD WARNING SWITCH “
”
3
All four turn signal lights and indica-
tors will flash simultaneously when
the switch is turned on with the igni-
tion switch in the “ON” or “P” position.
Use the hazard warning lights to warn
other traffic during emergency park-
ing or when your vehicle could other-
wise become a traffic hazard.
NOTICE
Sticking tape or placing objects in
front of the headlight can obstruct
headlight heat radiation. This can
result in headlight damage.
Do not stick tape on the headlight
or place objects in front of the
headlight.
NOTICE
Do not put objects in front of the
headlight or taillight when they are
on, and do not cover with clothes
when the motorcycle is stopped.
This may cause melting of the
lens or damage to the object by
the heat from the lens.
Summary of Contents for GSX-R1000/A
