Suzuki GSX-R1000/A, Owner'S Manual

Page: 31 / 151

2-19
4. Press and hold the SEL button
B
for more than 3 seconds. The lap
time counter returns to lap time
measure mode.
4. To clear lap time memory data
1. Press and hold ADJ button
1
for
more than 3 seconds to clear the
lap time memory data.
2. The lap time counter shows
00:00”00.
IMMOBILIZER INDICATOR “

”
C
(if equipped)
The immobilizer indicator blinks 2
times when the ignition switch is
turned on. Then indicator comes on 2
seconds and goes off.
Immobilizer system is designed to
help prevent motorcycle theft by elec-
tronically disabling the engine starting
system. The engine can be started
only with your original keys which
have an electronic identification code
programmed into it. The key commu-
nicates the identification code to the
immobilizer controller when the key is
turned to “ON” position.
NOTE:
•
It is impossible to start the engine
when the indicator remains blink-
ing.
• If the indicator remains blinking, it
means immobilizer system com-
munication error between key and
immobilizer controller or use of
wrong key. Turn off the ignition
switch and then turn on to com-
municate immobilizer system
properly.
• Two ignition keys are originally
registered to the immobilizer sys-
tem. It is possible to add two more
keys. The indicator blinks num-
bers of registered key when the
ignition switch is turned on.
• The indicator blinks for 24 hours
after the ignition switch is turned
off.
3
3