Suzuki GSX-R1000/A, Owner'S Manual

Page: 37 / 151

2-25
The LED setting will be changed as follows:
1. White LED Lighting
→
2. White LED Brightness
→
3. White LED Preset
RPM Setting
→
4. Orange LED Preset RPM Range Setting
1. White LED Lighting
1. Press and hold the SEL button
B
and turn on the ignition switch. Keep the
SEL button
B
pressed for more than 2 seconds.
2. Push the ADJ button
1
to change the lighting mode. The mode changes
as follows: LIGHT
→
BLINK
→
NO LIGHT
→
LIGHT. The white LED
comes on in the LIGHT mode and blinks in the BLINK mode. The engine
rpm indicator mark “

” comes on when the mode is in LIGHT or BLINK
mode is selected. When the SEL button
B
is pushed in the NO LIGHT
mode, the selection mode will be canceled and it will return the normal dis-
play mode.
2. White LED Brightness
1. Push the SEL button
B
from white LED lighting mode to change white
LED brightness mode.
2. Push the ADJ button
1
to change brightness in 5 steps. The brightness
indicator changes from “

” (min) to “

” (max).
3. White LED Preset RPM Setting
1. Push the SEL button
B
from the white LED brightness mode to change
white LED preset rpm setting. The white LED will light preset setting and
tachometer indicates preset rpm.
2. Push the ADJ button
1
to change the preset rpm from 5000 r/min to
10000 r/min in step 250 r/min and from 10000 r/min to 13750 r/min in step
50 r/min. When the ADJ button
1
is held in, the preset rpm will advance
continuously.
LIGHT BLINK NO LIGHT
White LED


Blink
–
Indicator mark
  
–