Sutter Instrument Lambda 10-3, Operation Manual

Page: 52 / 132

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)
40
4.11 4.11 4.11 4.11 Saving and Saving and Saving and Saving and Restoring SmartShutter Mode Configurations (MODE 6) Restoring SmartShutter Mode Configurations (MODE 6) Restoring SmartShutter Mode Configurations (MODE 6) Restoring SmartShutter Mode Configurations (MODE 6)
4.12 4.12 4.12 4.12 New Menus as of Lambda 10 New Menus as of Lambda 10 New Menus as of Lambda 10 New Menus as of Lambda 10----3 Firmware Rev. 1.21 3 Firmware Rev. 1.21 3 Firmware Rev. 1.21 3 Firmware Rev. 1.21
4.12.1 4.12.1 4.12.1 4.12.1 Setting Power Setting Power Setting Power Setting Power----up Defaults (MODE 7) up Defaults (MODE 7) up Defaults (MODE 7) up Defaults (MODE 7)
In Lambda 10-3’s programmed with firmware Rev. 1.21 or later, a new command was added
to the main menu called “7 – Defaults”. By pressing MODE and then 7, the following menu is
displayed.
1-Set the new default
2-Reset all to factory default
Speed: 1-WA 2-WB 3-WC 4-Comm_Port
Filter: 5-WA 6-WB 7-WC 8-Shutter_Mode
Setting More Power up Defaults
4.12.1.1 Setting the Speed Defaults for Wheels A, B, & C (MODE 7 1 1|2|3 [0 – 7])
Please enter the new default speed value between 0-7 …..
WHEEL: A-25MM 0 1 B-NC C-NC U
SHUTR: A-N(5/144) OFF B- OFF
SAVE INFO AS: 1-CFG1 2-CFG2 3-CFG3
GET INFO FROM: 4-CFG1 5-CFG2 6-CFG3
1-ACTIVE WHEEL 2-SPEED 3-TTL 4-TEST
5-SHUTTER MODE 6-CONFIG 7-DEFAULT
1-SET THE NEW DEFAULT
2-RESET ALL TO FACTORY DEFAULT
SPEED: 1-WA 2-WB 3-WC 4-COMM_PORT
FILTER: 5-WA 6-WB 7-WC 8-SHUTTER_MODE
DO YOU WANT TO SET OTHER DEFAULT VALUES?
1-YES 0-NO
PLEASE ENTER THE NEW DEFAULT SPEED VALUE
BETWEEN 0-7 ......