manualshive.com logo in svg

Sutter Instrument Lambda 10-3, Operation Manual

The Sutter Instrument Lambda 10-3 is a cutting-edge research instrument designed for precise and accurate control of microscope filter wheels. To unlock the full potential of this device, make sure to download the comprehensive Operation Manual from our website for free.

Share
Download
background image

 

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829) 

14 

SmartShutter is attached to the 25

SmartShutter is attached to the 25

SmartShutter is attached to the 25

SmartShutter is attached to the 25----pin connector. Do not attempt to attach two filter 

pin connector. Do not attempt to attach two filter 

pin connector. Do not attempt to attach two filter 

pin connector. Do not attempt to attach two filter 

wheels to the Wheel A set of connectors.

wheels to the Wheel A set of connectors.

wheels to the Wheel A set of connectors.

wheels to the Wheel A set of connectors.    

WHEEL B

WHEEL B

WHEEL B

WHEEL B (Gen 1 

 (Gen 1 

 (Gen 1 

 (Gen 1 –

––

– 3) or B (Gen 4)

 3) or B (Gen 4)

 3) or B (Gen 4)

 3) or B (Gen 4)    

The connectors for WHEEL B are provided for interfacing with a second filter wheel 
and/or shutter, and have the same functionality as those for WHEEL A.. 

WHEEL C (

WHEEL C (

WHEEL C (

WHEEL C (Gen 1 

Gen 1 

Gen 1 

Gen 1 –

––

– 3)

 3)

 3)

 3)    

Only a filter wheel can be connected as Wheel C. The connectors for Wheel C cannot 
be used for shutters (as part of the filter wheel or standalone). If a filter wheel that is 
equipped with an integrated shutter is attached as Wheel C, the integrated shutter 
will be non-functional. 

NOTE

NOTE

NOTE

NOTE 1

 1

 1

 1: 

: 

: 

: Do not attempt to attach two filter wheels to the Wheel C set of connectors.

Do not attempt to attach two filter wheels to the Wheel C set of connectors.

Do not attempt to attach two filter wheels to the Wheel C set of connectors.

Do not attempt to attach two filter wheels to the Wheel C set of connectors.    

NOTE 2: If the filter wheel is connected to the 15

NOTE 2: If the filter wheel is connected to the 15

NOTE 2: If the filter wheel is connected to the 15

NOTE 2: If the filter wheel is connected to the 15----pin connector and has an integrated 

pin connector and has an integrated 

pin connector and has an integrated 

pin connector and has an integrated 

UNIBLITZ shutte

UNIBLITZ shutte

UNIBLITZ shutte

UNIBLITZ shutter, the shutter will be nonfunctional.

r, the shutter will be nonfunctional.

r, the shutter will be nonfunctional.

r, the shutter will be nonfunctional.    

NOTE 3: If the filter wheel is connected to the 25

NOTE 3: If the filter wheel is connected to the 25

NOTE 3: If the filter wheel is connected to the 25

NOTE 3: If the filter wheel is connected to the 25----pin connector and has an integrated 

pin connector and has an integrated 

pin connector and has an integrated 

pin connector and has an integrated 

SmartShutter, the SmartShutter will be nonfunctional.

SmartShutter, the SmartShutter will be nonfunctional.

SmartShutter, the SmartShutter will be nonfunctional.

SmartShutter, the SmartShutter will be nonfunctional.    

C (

C (

C (

C (Gen

Gen

Gen

Gen    4

4

4

4))))    

This port array is configurable to support either a standalone filter wheel or a 
standalone SmartShutter. 

NOTE

NOTE

NOTE

NOTE 1

 1

 1

 1: 

: 

: 

: If both a standalone filter wheel and a SmartShutter are connected at the 

If both a standalone filter wheel and a SmartShutter are connected at the 

If both a standalone filter wheel and a SmartShutter are connected at the 

If both a standalone filter wheel and a SmartShutter are connected at the 

same time, only one or the other will be functional according to how the Lambda 10

same time, only one or the other will be functional according to how the Lambda 10

same time, only one or the other will be functional according to how the Lambda 10

same time, only one or the other will be functional according to how the Lambda 10----3 

3 

3 

3 

is configured.

is configured.

is configured.

is configured.    

NOTE 2: If the connected filter whe

NOTE 2: If the connected filter whe

NOTE 2: If the connected filter whe

NOTE 2: If the connected filter wheel is equipped with a UNIBLITZ shutter, the 

el is equipped with a UNIBLITZ shutter, the 

el is equipped with a UNIBLITZ shutter, the 

el is equipped with a UNIBLITZ shutter, the 

shutter will be nonfunctional.

shutter will be nonfunctional.

shutter will be nonfunctional.

shutter will be nonfunctional.    

NOTE 3: A standalone SmartShutter is connected to the SMARTSHUTTER 

NOTE 3: A standalone SmartShutter is connected to the SMARTSHUTTER 

NOTE 3: A standalone SmartShutter is connected to the SMARTSHUTTER 

NOTE 3: A standalone SmartShutter is connected to the SMARTSHUTTER 
connector via 

connector via 

connector via 

connector via a cable with 9

a cable with 9

a cable with 9

a cable with 9----pin D

pin D

pin D

pin D----SHELL connectors at each end.

SHELL connectors at each end.

SHELL connectors at each end.

SHELL connectors at each end.    

 

USB PORT: 

USB PORT: 

USB PORT: 

USB PORT: This is a B type USB connector, which allows connection to a host computer 
USB port. 

SERIAL PORT

SERIAL PORT

SERIAL PORT

SERIAL PORT: This 9 pin, DSUB connector is used for establishing a serial interface 
between the Lambda 10-3 and a remote device (computer) using the cable provided. 

PARALLEL POR

PARALLEL POR

PARALLEL POR

PARALLEL PORT

T

T

T: This 25 pin, DSUB connector is used for establishing a parallel interface 

between the Lambda 10-3 and a remote device (computer) using the cable provided. 

LINE POWER

LINE POWER

LINE POWER

LINE POWER: This socket is used to connect the power cord to the Lambda 10-3. 

FUSE LABEL

FUSE LABEL

FUSE LABEL

FUSE LABEL:  Information found here includes the model number of this instrument, 
appropriate supply voltage, and the type of fuse required for the supply voltage. 

Summary of Contents for Lambda 10-3





































































































































Reviews:

No comments

Related manuals for Lambda 10-3

Fein GBA 18V Manual preview
GBA 18V
Brand: Fein Pages: 248
ZF 400 Series Operating Instructions Manual preview
400 Series
Brand: ZF Pages: 30
Raymarine ST7000 Owner'S Handbook Manual preview
ST7000
Brand: Raymarine Pages: 111
B&K CT1 User Manual preview
CT1
Brand: B&K Pages: 12
Panasonic LP-M Series Maintenance Manual preview
LP-M Series
Brand: Panasonic Pages: 174
lancer BEV85 Quarterly Service Work Instruction preview
BEV85
Brand: lancer Pages: 3
lancer 2300 Series Installation Manual preview
2300 Series
Brand: lancer Pages: 12
R2 TST Instruction And Maintenance Manual preview
TST
Brand: R2 Pages: 26
Ofa Bamberg memory Instructions For Use Manual preview
memory
Brand: Ofa Bamberg Pages: 80
Yanmar RT66 Operator'S Manual preview
RT66
Brand: Yanmar Pages: 49
Baltic POSEIDON User Manual preview
POSEIDON
Brand: Baltic Pages: 68
H&S 2958 Operator'S & Parts Manual preview
2958
Brand: H&S Pages: 76
Össur QUICK-ALIGN Vari-Flex Instructions For Use Manual preview
QUICK-ALIGN Vari-Flex
Brand: Össur Pages: 36
Össur Patriot Collar Instructions For Use preview
Patriot Collar
Brand: Össur Pages: 2
Össur Unloader One Instructions For Use Manual preview
Unloader One
Brand: Össur Pages: 8
C-LITE C-HB-A-LB2-SCCT Series Installation Instructions Manual preview
C-HB-A-LB2-SCCT Series
Brand: C-LITE Pages: 9
Launch X-431 Torque HD Manual preview
X-431 Torque HD
Brand: Launch Pages: 3
Hammer Strength HDT-MAB Assembly Manual preview
HDT-MAB
Brand: Hammer Strength Pages: 8

Brands by name

Popular brands

Load more brands