Sutter Instrument Lambda 10-3 Operation Manual Download Page 101

Page: 101 / 132

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)

10.

MAINTENANCE

Routine cleaning of the Lambda 10-3 system is required to prevent excessive dust
accumulations. This is done by wiping all exterior surfaces with a dry, soft, cotton cloth.

All retaining rings should be inspected occasionally to be certain that they are seated into the
filter holders and cups.

CAUTION: The filter wheel is a precision

CAUTION: The filter wheel is a precision----machined part, mounted on a stepper motor shaft.

machined part, mounted on a stepper motor shaft.

As such, it DOES NOT REQUIRE LUBRICATION. Attempting to lubricate any part of the

As such, it DOES NOT REQUIRE LUBRICATION. Attempting to lubricate any part of the
filter wheel or shutter assembly will void the warranty and may

filter wheel or shutter assembly will void the warranty and may

filter wheel or shutter assembly will void the warranty and may harm the motor or shutter.

harm the motor or shutter.

Summary of Contents for Lambda 10-3





































































































































Search results

Summary of Contents for Lambda 10-3

Reviews:

Related manuals for Lambda 10-3

Brands by name

Popular brands

Sutter Instrument Lambda 10-3, Operation Manual

Search results

Summary of Contents for Lambda 10-3

Reviews:

Related manuals for Lambda 10-3

Brands by name

Popular brands