Sutter Instrument Lambda 10-3, Operation Manual

Page: 53 / 132

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)
41
4.12.1.2 Setting the Position (Filter) Defaults for Wheels A, B, & C (MODE 7 1 5|6|7 [0 – 7])
Please enter the default filter value between 0-9……
4.12.1.3 Setting the Default Communications Port (MODE 7 1 4)
MODE 7 1 4 (comm. port)
Please select the default comm. port: 1-USB 2-Serial 3-Parallel
(USB = MODE 7 1 4 1)
(Serial = MODE 7 1 4 2)
(Parallel = MODE 7 1 4 3)
4.12.1.4 Setting the Current SmartShutter Mode as the Default (MODE 7 1 8 1|2)
MODE 7 1 8 (shutter mode)
4.12.1.5 Resetting All to Factory Defaults (MODE 7 2)
When selecting “reset all to factory defaults” , the following menu is displayed, providing you
a choice of going ahead with the reset or canceling.
If pressing 0 (for “No”) to cancel resetting all to the factory defaults, the command is
cancelled and the display returns immediately to the main status menu.
If 1 (for “Yes”) is pressed, the controller immediately sets all settings to their factory defaults
(listed below), and the display returns immediately to the main status menu.
The factory defaults are:
PLEASE ENTER THE NEW DEFAULT FILTER
VALUE BETWEEN 0-9......
PLEASE SELECT THE DEFAULT COMMUNICATION
PORT: 1-USB 2-SERIAL 3-PARALLEL
ARE YOU SURE TO RESET ALL THE SETTINGS
TO THE FACTORY DEFAULT? 1-YES 0-NO
ARE YOU SURE TO RESET ALL THE SETTINGS
TO THE FACTORY DEFAULT? 1-YES 0-NO