Sutron CDMALink-1C Operation & Maintenance Manual Download Page 99

Page: 99 / 192

Sutron Corporation X-Link Operations & Maintenance Manual, Rev 1.63 5/24/2016 pg. 99

7.3.1.5.

Output1

X-Link features a digital output labeled DOUT. X-Link can automatically activate
the output. See the Output section for details (page 120.)

7.3.1.6.

Modbus

All Modbus settings are described in the Modbus section (page 169).

7.3.1.7.

Setup Defaults

Selecting this option restores the unit’s factory defaults. This is a complete
erasing of the setup. All measurement and telemetry setup will be lost. The
status will also be cleared. This option does not erase the log.

Reset the station to defaults using LinkComm's Setup Default button on the
Diagnostic tab or via command line by typing SETUP DEFAULT.

Summary of Contents for CDMALink-1C

































































































































































































Search results

Summary of Contents for CDMALink-1C

Reviews:

Related manuals for CDMALink-1C

Brands by name

Popular brands

Sutron CDMALink-1C, Operation & Maintenance Manual

Search results

Summary of Contents for CDMALink-1C

Reviews:

Related manuals for CDMALink-1C

Brands by name

Popular brands