Sutron Corporation X-Link Operations & Maintenance Manual, Rev 1.63 5/24/2016 pg. 44
To send a command to an SDI-12 device connected to X-Link, enter the
Address
and
Command
fields, and then press the
Send
button. Be sure to check
SDI-12
over RS-485
, if you need to send the command over the RS-485 bus. The results
of the command are shown in the SDI-12 history window.
To have X-Link look for any and all sensors on the SDI-12 bus, press the
Find
Devices
button. Information regarding what sensors are found is displayed in the
SDI-12 history window.
Press the
Clear
button to clear the SDI-12 history window.
4.8.6.
Setting the Clock
Press the
Set Clock
button on the Diagnostics tab to open the Set Clock dialog.
The Set Clock dialog is shown below:
