P/N: 670-00029A
2/17/12
23
7.7 Motorized Pump Installation
The motorized pump can be mounted in any orientation, however it is recommended that
the unit is mounted horizontally. The motorized pump should be mounted so that there is
enough hydraulic tubing to reach each lift cylinder and enough clearance for the
minimum hydraulic tubing bend radius of 2 in. (51mm) to be maintained. Suspa
®
Incorporated offers a black thermoformed plastic motor cover to further protect the gear
motor and cable connections from possible damage. The motor cover can be purchased
on our website at
http://movotec.com
.
•
Position motorized pump assembly in the desired mounting location. Ensure
enough room exists for motor controller.
Under Work Surface View
(Tubing not shown)
•
Mark and prepare three holes in the locations provided by the motor bracket and
rear pump support bracket.
Rear Pump Support Bracket
Motor Bracket
