P/N: 670-00029A
2/17/12
25
•
Align the switch body with front edge of the work-surface. Mark and prepare two
holes in the locations provided in the switch enclosure.
•
Using the appropriate screws, mount the switch to the work-surface taking special
care not to over tighten the screws. While (2) mounting screws are included with
the switch, ensure they will work for the particular application before using to
mount switch.
•
Check mounting screws to ensure that the switch is secured.
7.10 Motor Controller Cable Connections
•
The motor controller ports are labeled on the top side of the control box.
•
The switch plug is
blue
and corresponds with the
round
switch port shown
above. The motor cable plugs are marked “
M1
” and “
M2
” on the cable, and
correspond with the
(M1) and (M2)
motor ports shown above (white, rectangular
plugs).
