P/N: 670-00029A
2/17/12
13
7.0 Installation Instructions
The Movotec
®
Q-Drive ATU Lift System can be used with a variety of brackets,
hardware, and other structural components to construct a height adjustable workstation.
IT IS THE RESPONSIBILITY OF THE WORKSTATION COMPONENT
PURCHASER AND USER TO ENSURE THE TABLE COMPONENTS AND
CONFIGURATION ARE APPROPRIATE FOR THE APPLICATION.
This section contains installation instructions for the Movotec
®
Q-Drive ATU Lift System
when used with the Movotec
®
ATU Workstation Kit. The installation procedure may
vary depending on the brackets, hardware, and/or other structural components used.
Please note that the Movotec
®
ATU Workstation Kit is not included with system.
Contact Suspa
®
Incorporated for Movotec
®
ATU Workstation Kit ordering information.
FOLLOW ALL SAFETY INSTRUCTIONS CONTAINED
IN SECTION 3.0 OF THIS MANUAL BEFORE
INSTALLING THIS PRODUCT. FAILURE TO
FOLLOW THE INSTRUCTIONS IN THIS MANUAL
COULD RESULT IN PROPERTY DAMAGE,
PERSONAL INJURY OR DEATH.
7.1 Workstation Kit Components
The Movotec
®
ATU Workstation Kit includes:
•
(2) - Foot brackets
•
(2) - Top brackets
•
(2) - Cross beam brackets
•
(1) - Cross beam
•
(8) - 5/16”-18 forming screws
•
(4) - Glides
•
(4) - M10 hex nuts
•
(8) - M10 washers
•
(4) - End plugs
•
(2) - Hole plugs
•
(4) - 1/4”-20 flat head screws
•
(4) - 1/4”-20 hex nuts
•
(4) - #14 tapping screws
•
(3) - 13mm retaining rings
