P/N: 670-00029A
2/17/12
26
•
The switch plug has an arrow to indicate proper connection alignment. This
arrow must face away from the work-surface and toward their corresponding
connection port.
To make the controller connections:
•
Connect the
black
motor cable plugs in to their respective
(M1)
and
(M2)
motor
ports. Firmly press the plug into the port until the plastic hook “clicks” in place.
It is important to install
both
motor cables in to the control
box, or the system will not operate! Ensure both
connections are secure and in the correct ports on the
controller.
•
Connect the
blue
switch cable plug to the
(HS)
switch port. Firmly press the plug
into the port to ensure that a complete connection has been made.
•
Connect power cord to motor controller IEC power port. Firmly press power cord
plug into the IEC receptacle to ensure that a complete connection has been made.
•
Check all connections to ensure that they have been made correctly and
completely.
NOTICE
