P/N: 670-00029A
2/17/12
5
MAINTENANCE SAFEGUARDS.
Prior to performing any maintenance or service on
the device, remove the load from all lift cylinders and unplug the motor controller from
power source. The workstation or structure that the lift system is attached to should be
stabilized to prevent personal injury or property damage during maintenance or service
procedures.
RETRACT SYSTEM BEFORE MOVING.
To reduce the risk of property damage and
personal injury, always retract the lift system fully before moving the equipment.
UNPLUG BEFORE CLEANING.
Retract the lift system, unplug the motor controller
from power source, and allow the system to cool before cleaning components. Clean
system components with a mild soap and water-damped cloth. Do not use corrosive
cleaning agents or high pressure wash systems to clean lift system components. Make
sure system is clean and dry before plugging into power source and operating the system.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
