P/N: 670-00029A
2/17/12
22
•
Fasten top bracket to ATU using (2) 5/16”-18 thread forming screws. The
function of the thread forming screw is to cut threads into the ATU as the screw is
driven into the material.
Cantilever Configuration Shown
•
Repeat top bracket installation procedure for second top bracket.
7.6 Work Surface Installation
•
Position work surface in desired mounting position. Please note that work surface
is not included with system or workstation kit. Mark and prepare mounting holes
in the locations provided by the top brackets.
(
Pump and Tubing Not Shown) Under Work Surface View
(ATU and Foot Bracket Not Shown)
•
Using appropriate screws, mount work surface to top brackets. Please note that
mounting screws are not included with system or workstation kit.
•
Check mounting screws to ensure that the work surface is secured.
