9
9.
While holding the valve door closed with one
hand, tighten the knobscrew in a clockwise
motion until the door is snug.
Do not over
tighten the screw.
10. Close the refrigerated product compartment
door.
11. Squeeze the product delivery tube just below the
valve with all fingertips.
12. PC Dispensers: While squeezing the tube, press
the “small” product quantity button on the front
door button panel
once
only. This will cause the
valve to operate once and relieve pressure in the
tube.
SS Dispensers: While squeezing the tube, hold
the lever down to relieve pressure in the tube.
13. Use sharp scissors or a sharp knife to carefully
cut the product delivery tube at a 45° angle at a
maximum length of 5/8” from the bottom of the
valve block. Discard the cut portion of the tube.
Cut Tube
The dispenser is ready for use.
