6
INSPECTION FOR DAMAGE
When you receive the dispenser, inspect the exterior of the shipping container for damage. Note
any damage in detail. Uncrate the dispenser at once (see instructions below). Examine the
dispenser for damage. Report any damage to the transportation company immediately. File a
claim for damages promptly. Your immediate inspection protects you against loss since
SureShot Dispensing Systems® is not responsible for damages incurred during shipment.
UNCRATING THE DISPENSER
WARNING
: Always lift the dispenser from the bottom. Do
not
lift the dispenser by the door.
To uncrate:
1.
Make sure the box is positioned with the arrow pointing upward.
2.
Cut the packing straps at the top of the box.
3.
Lift the top tray off the box.
4.
Lift the center sleeve off the box.
5.
Remove the protective corner inserts from the bottom tray.
6.
Lift the dispenser by its bottom out of the tray. Always use two people to lift the
dispenser.
7.
Remove the plastic protective covering from the stainless steel exterior of the
dispenser, by peeling it off. To peel, hold the dispenser firmly at the top and peel from
top to bottom.
8.
Prior to use, read the Operations Manual. Store it for future use.
NOTE: The carton top, sleeve, and bottom tray may be stored for future shipping.
RESHIPMENT
Packaging for reshipment is done in the reverse order of uncrating. If packaging is not
available, it can be purchased locally, or from our factory by request. Any damage occurring in
transit of the returned goods caused by improper packaging is not considered a defect covered
by Warranty.
ELECTRICAL REQUIREMENTS
Be sure the current at the power source receptacle is: 120v AC, single phase, 3 Amp, 60 Hz.
The power cord is furnished with a ULapproved 3prong attachment plug. This plug is designed
to fit a receptacle with provisions for a grounding stud. The dispenser includes a microcontroller
and must be operated on grounded electrical wiring at all times. Failure to do so will void the
Warranty.
SERVICING ELECTRICAL
Electrical servicing must be carried out by a qualified technician. The Warranty will be null and
void if the dispenser is serviced by unqualified personnel. If you need assistance, call the
SureShot Dispensing Systems® Technical Assistance Center at 18887779990 or
19028659602.
SERVICING REFRIGERATION
Any servicing of the refrigeration system must be carried out by a qualified technician. The
Warranty will be null and void if the refrigeration system is serviced by unqualified personnel. If
you need assistance, call the SureShot Dispensing Systems® Technical Assistance Center at
18887779990 or 19028659602.
