12
LOADING: Fill in Place tanks
To Fill or Refill Tanks in Place:
1.
Open the front door of the dispenser.
2.
Flip up the access door on the top of the dispenser to
gain access to the tank lid.
3.
Open the lid on the tank to be filled.
4.
Fill or Refill the tank to any desired level with product
chilled to 41°F / 5°C or less.
5.
Close tank lid.
6.
Close the top door.
7.
Close the dispenser door.
8.
Reset: see below
PortionControl FillinPlace Dispensers: RESET after refilling tanks
To Reset:
1.
Select the tank that has been refilled by pressing
the product selection button for that tank (e.g.
cream) on the button panel.
2.
Press the RESET button next to the LCD Display.
Continue to press the RESET button until the LCD
Display matches the fill level on the tank (0.5 gallon
increments).
NOTE:
·
The reset operation must be completed within 3 seconds of selecting the product button.
Every press of the RESET button places the timeout feature back to 3 seconds, allowing
time to cycle through to the correct level of refill. A beep is heard with each press of the
RESET button. When the selected product button’s LED is extinguished, the new refill
level is stored in memory. By pressing the button repeatedly, the refill level will cycle
through the allowable 0.5 gallon increments.
·
Low tank level is indicated by the slow flashing of the corresponding LED on the button
panel. The LED will begin to slow flash when product is at the 40 oz (1200 ml) level of the
tank. Follow the procedure to refill the tank to the desired level. Refilling and resetting the
appropriate tank will extinguish the low level light indicator.
The dispenser is now ready to resume operations.
To Remove an Empty Product Bag or Tank:
1.
Place a container under the dispensing valve to catch any residual product and to prevent
spills.
2.
Open the valve door by unscrewing the knob in a counterclockwise motion.
3.
Remove the empty bag or tank while pinching the product delivery tube so that it does not
drip. Discard the empty product bag.
4.
Wash, rinse, sanitize and airdry the product tank, using cleaning instructions on page 22.
Reset
