26
Follow the instructions below for adjustments, depending on whether your dispenser is running
too cold or too warm.
If The Dispenser Is Running Too Cold:
B16 Circuit Boards
C01008 Circuit Boards
To increase the temperature or to make it
warmer, turn the white center slot left or
counterclockwise 1 hour to 11 o’clock. Allow
this adjustment to take effect for 3 hours.
If
still
not
warm
enough,
adjust
the
Temperature Adjust to 10 o’clock and repeat
the wait time. You can further adjust the
temperature to 9 o’clock. Do not adjust further.
To increase the temperature or to make it
warmer, press the DOWN button once to recall
the current setting, then immediately press the
DOWN button a second time to adjust the
refrigeration setting warmer by one setting.
The circuit board display should indicate this
new setting. Allow this adjustment to take effect
for 3 hours.
If still not warm enough, repeat this procedure.
Do not place the refrigeration setting on 00
because this is the OFF position.
If, after these adjustments are made, your dispenser is still running too cold, please contact the
SureShot Dispensing Systems® Technical Assistance Center at 18887779990 or
19028659602 during your 1year warranty period or a qualified Refrigeration Technician after
your warranty period has expired.
If The Dispenser Is Running Too Warm:
B16 Circuit Boards
C01008 Circuit Boards
To decrease the temperature or to make it
colder, turn the white center slot right or
clockwise 1 hour to 1 o’clock. Allow this
adjustment to take effect for 3 hours.
If still not cold enough, adjust the Temperature
Adjust to 2 o’clock and repeat the wait time.
You can further adjust the temperature to 3
o’clock. Do not adjust further.
To decrease the temperature or to make it
colder, press the UP button once to recall the
current setting, then immediately press a
second time to adjust the refrigeration setting
colder by one setting. The circuit board display
should indicate this new setting. Allow this
adjustment to take effect for 3 hours.
If still not cold enough, repeat this procedure.
If, after these adjustments are made, your dispenser is still running too warm, please contact the
SureShot Dispensing Systems® Technical Assistance Center at 18887779990 or
19028659602 during your 1year warranty period or a qualified Refrigeration Technician after
your warranty period has expired.
