Supero SuperWorkstation 5036T-T, User Manual

Page: 82 / 98

7-18
S
uper
W
orkstation 5036T-T User's Manual
Sredir Memory Display Delay
This feature defi nes the length of time in seconds to display memory information.
The options are No Delay, Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
X
Hardware Health
Confi guration
This feature allows the user to monitor Hardware Health of the system and review
the status of each item when displayed.
CPU Temperature, System Temperature
CPU Temperature Threshold
This option allows the user to set the CPU Overheat Temperature Threshold. When
the CPU temperature reaches this overheat threshold, the system will slow down
and the CPU fan will be activated to prevent CPU overheat. The options are TCon-
trol (the Thermal Control Setting inside the CPU), TC 5
0
(Thermal Control
S 5
0
C), and TC 10
0
(Thermal Control S 10
0
C).
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase, and vice versa.
Select Workstation if your system is used as a Workstation. Select Server if your
system is used as a Server. Select “Disabled, (Full Speed @12V)” to disable the
fan speed control function and allow the onboard fans to constantly run at the full
speed (12V). The Options are: 1. Disabled , 2. 4-pin (Super Quiet), and 3. 4-pin
(Workstation).
Voltage Monitoring
Vcore, +3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3VSB, and Vbatt.
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When fi rst installed, Supero Doctor III
adopts the temperature threshold settings previously set in the BIOS. Any
subsequent changes to these thresholds must be made within Supero Doc-
tor, since the SD III settings override the BIOS settings. For the Windows
OS to adopt the BIOS temperature threshold settings, please change the
SDIII settings to be the same as those set in the BIOS.