Supero SuperWorkstation 5036T-T, User Manual

Page: 44 / 98

5-16
S
uper
W
orkstation 5036T-T User's Manual
SGPIO Header
Two SGPIO (Serial General Purpose
Input/Output) headers are designated
SGPIO0 and SGPIO1. These head-
ers are used to communicate with
the system's enclosure management
chip. See the table on the right for pin
defi nitions.
SGPIO Header
Pin Defi nitions (T-SGPIO0/T-SGPIO1)
Pin# Defi nition Pin Defi nition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
NC = No Connection
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Serial Ports
Two serial ports are included on the
X8SAX. See the table on the right for
pin defi nitions.
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Speaker
On the JD1 header, pins 3~4 are used
for the internal speaker. Close pins
3~4 with a cap to use the onboard
speaker. If you wish to use an external
speaker, connect the speaker cable to
pins 1~4. See the table on the right for
pin defi nitions.
Speaker Connector
Pin Defi nitions (JD1)
Pin Setting Defi nition
Pins 3~4 Internal Speaker
Pins1~4 External Speaker