Supero SuperWorkstation 5036T-T, User Manual

Page: 80 / 98

7-16
S
uper
W
orkstation 5036T-T User's Manual
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64 , 96, 128,
160, 192, 224 and 248.
PCIX Slot Frequency
Use this setting to change the clock frequency of the PCIX slot(s). The available
options are
Auto , 33MHz PCI, 66MHz PCI, 66MHz PCI-X M1, 100MHz PCI-X
M1, and 133MHz PCI-X M1.
PXH IOAPIC Function
Disable this setting for Windows Vista and Windows 2008. This is provided to
optimize compatibility. The options are
Disabled and Enabled.
PCI IDE Bus Master
When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE
drives. The options are Disabled and
Enabled .
PCI Slot 1 ~ PCI Slot 6
Use this setting to disable any of the PCI slots. The options are Disabled and
Enabled .
Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM
This feature is to enable LAN OPROM for PXE. This is to boot computers using
a network interface. The options are
Disabled and Enabled.
X
Super IO Device Confi guration
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2
are Disabled, 2F8/IRQ3 , 3E8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Mode
Use this feature to confi gure Serial Port 2 mode. The options are Normal, IrDA
and ASK IR. IrDA (Infra-Red Data) is an industry standard for remote control