Supero SuperWorkstation 5036T-T, User Manual

Page: 13 / 98

1-3
Chapter 1: Introduction
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Chassis Features
The following is a general outline of the main features of the SC733TQ-465 work-
station chassis.
System Power
The SC733TQ-465 features a low-noise, high-effi ciency 465W power supply. Power
must be removed from the system before servicing or replacing the power supply.
SATA Subsystem
The SC733TQ-465 chassis was designed to support four SATA hard drives, which
are hot-swappable units.
Front Control Panel
The control panel on the SuperWorkstation 5036T-T provides you with system
monitoring and control. LEDs indicate power on, network activity, hard disk drive
activity and overheat conditions. The control panel also includes a main power
button and a system reset button.
I/O Backplane
The SC733TQ-465 is a mid-tower chassis designed to be used as a workstation
platform. The I/O backplane includes two COM ports, six USB 2.0 ports, PS/2 mouse
and keyboard ports, one gigabit Ethernet port, one IEEE 1394 (Firewire) port (which
occupies one PCI slot) and HDA audio ports. Seven standard size PCI expansion
cards may be added to the system.
Cooling System
The SC733TQ-465 chassis one 9-cm fan located at the front of the chassis and a
12-cm fan located in the power supply. Both fans operate continuously. An exhaust
fan (FAN-0077L4 or FAN-0105L4) is also included for increased airfl ow effi ciency.