Supero SuperWorkstation 5036T-T, User Manual

Page: 37 / 98

Chapter 5: Advanced Serverboard Setup
5-9
Memory Support
The X8SA X suppor ts up to 24 GB of unbuffered ECC/non-ECC DDR3 -
1333/1066/800 SDRAM.
Notes:
Due to the OS limitations, some operating systems may not show more than
•
4 GB of memory.
Due to allocating memory to system devices, memory remaining available for
•
operational use will be reduced when 4 GB of SDRAM is used. The reduc-
tion in memory availability is disproportional. (Refer to the following Memory
Availability Table for details.)
Order of Populating DIMM Slots
For memory to work properly, follow the table below for the correct order of populat-
ing the DIMM slots. See the motherboad layout page for slot numbering.
DIMM Installation Chart
Number of
DIMMs
1A 2A 3A 1B 2B 3B
1 X
2 X X
3 X X X
4 X X X X
5 X X X X X
6 X X X X X X
Note: an "X" indicates the slot should be populated.
Population Rules
Any combination of x8 and x16 UDIMMs, with 1Gb or 2Gb DRAM density.
•
Populate DIMMs using the "A" DIMM slots fi rst. Any of the slots may be used.
•
However, populate the "B" slots only after all "A" slots have been fi lled.