Supero SuperWorkstation 5036T-T, User Manual

Page: 71 / 98

Chapter 7: BIOS
7-7
tion and heat dissipation. Please refer to Intel’s web site for detailed information.
The options are Disable: Disable GV3 and Enable: Enable GV3.
Intel® TurboMode Tech (Available if Intel® EIST technology is Enabled)
This feature allows processor cores to run faster than marked frequency in specifi c
conditions. The options are Disabled and Enabled.
Intel Turbo Boost Confi guration
Turbo Ratio Limit Program
This enables a feature that sets a limit to how high the Processor's clock ratio is
set in relation to the bus speed. The options are Enabled and Disabled
1 - Core Ratio Limit
This increases (multiplies) the Processor's core (1) clock speed in relation to
the bus speed. Default is 26 . Press "+" or "-" on your keyboard to change
this value.
2 ~ 3 - Core Ratio Limit
This increases the Processor's core (2~3) clock speed in relation to the bus
speed. Default is 25 . Press "+" or "-" on your keyboard to change this value.
TDC Limit Override
This option will override the system's default Current settings for the processor.
The options are Enabled and Disabled.
TDC Limit Value
This option sets the processor's Current value. The Default is 880. Press "+"
or "-" on your keyboard to change this value.
TDP Limit Override
This option will override the system's default Power settings for the processor.
The options are Enabled and Disabled.
TDP Limit Value
This option sets the processor's Power value. Default is 1040. Press "+" or "-"
on your keyboard to change this value.
Intel® C-STATE Architecture
C-State Architecture is a type of processor power management developed by
Intel to allow deeper power reduction from the basic C1 (Halt State) which
blocks clock cycles to the CPU. C-State is an idle state and instructions
are not processed by the CPU. A brief explanation of all the C-States are
as follows: