Supero SuperWorkstation 5036T-T, User Manual

Page: 43 / 98

Chapter 5: Advanced Serverboard Setup
5-15
Fan Headers
The X8SAX has six fan headers, all of
which are 4-pin fans. However, pins
1-3 of the fan headers are backward
compatible with the traditional 3-pin
fans. See the table on the right for
pin definitions. The onboard fan
speeds are controlled by Thermal
Management (via Hardware Monitor-
ing) under the Advanced Section in
the BIOS. The default is disabled.
When using Thermal Management
setting, please use all 3-pin fans or
all 4-pin fans.
ATX PS/2 Keyboard and PS/2
Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse are located on the I/O back-
panel. The mouse port is above the
keyboard port. See the table on the
right for pin defi nitions.
Fan Header
Pin Defi nitions
(FAN1-6)
Pin# Defi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM Control
PS/2 Keyboard and
Mouse Port Pin
Defi nitions
Pin# Defi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL on the serverboard. See
the table on the right for pin defi ni-
tions. You must also have a LAN card
with a Wake-On-LAN connector and
cable to use this feature.
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
LAN1/LAN2 (Ethernet Ports)
Two Ethernet ports are located on the
I/O backplane. These ports accept
RJ45 type cables.