Supero Super P6DNF, User Manual

Page: 95 / 106

D-5
Appendix D: AMI BIOS POST Diagnostics Error Messages
Check Point Description
43 Entered in the virtual mode. Going to enable interrupts
for diagnostics mode.
44 Interrupts enabled (if diagnostics switch is on). Going
to initialize data to check memory remap at 0:0.
45 Data initialized. Going to check for memory remap at
0:0 and find the total system memory size.
46 Memory remap test done. Memory size calculation
over. About to go for writing patterns to test memory.
47 Pattern to be tested written in extended memory.
Going to write patterns in base 640 KB memory.
48 Patterns written in base memory. Going to find out
amount of memory below 1 MB memory.
49 Amount of memory below 1 MB found and verified. Go-
ing to find out amount of memory above 1 MB memory.
4B Amount of memory above 1 MB found and verified.
Checking for soft reset and clearing the memory below
1 MB for a soft reset. (If at power on, go to checkpoint
4E).
4C Memory below 1 MB cleared. (SOFT RESET.) Going
to clear memory above it.
4D Memory above 1 MB cleared. (SOFT RESET.) Going
to save the memory size. Going to checkpoint 52 next.
4E Memory test started. (NO SOFT RESET.) About to dis-
play the first 64 KB memory test.
4F Memory size display started. This will be updated dur-
ing memory test. Going for sequential and random
memory test.