Supero Super P6DNF, User Manual

Page: 33 / 106

2-13
Chapter 2: Installation
To Remove:
Use your thumb to gently push the edge of
the socket and release the module. Do this
on both sides for each module.
SIMM
To Install:
Insert at an
angle, then
snap upright
into place.
Figure 2-1. Installing/Removing a SIMM Memory Module
Removing SIMM Modules
1. Remove SIMM modules in correct descending order — from
Bank 3 through Bank 0.
2. Gently push the edge of the sockets to the side to release the
module. Remove one side of the SIMM module first, and then
the other side, to prevent breaking the socket.