Supero Super P6DNF, User Manual

Page: 25 / 106

2-5
Chapter 2: Installation
Connector Pin
N u m b e r N u m b e r Function
J20 1 Power Good (Power on reset, TTL signal)
2 +5 VCC
3 +12 VCC
4 -12 VCC
5 Ground (Black wire to be connected)
6 Ground (Black wire to be connected)
7 Ground (Black wire to be connected)
8 Ground (Black wire to be connected)
9 -5 VCC
10 +5 VCC
11 +5 VCC
12 +5 VCC
Table 2-2. 5V Power Supply Connector Pin Definitions
Power Supply Connectors
Attach power supply cables to J20 for a 5V power supply or J21 for
a 3.3V power supply (optional for OEM customers only). Do not
force the cables, but make sure they are fully seated. The two black
wires on each power cable sit next to each other when correctly
installed. See Table 2-2 for pin definitions of a 5V power supply.
See Table 2-3 for pin definitions of a 3.3V power supply.
Turbo Function
There are no jumpers for turbo switch and turbo LED. By default,
SUPER P6DNF/P6SNF is in turbo mode.