Supero Super P6DNF, User Manual

Page: 93 / 106

D-3
Appendix D: AMI BIOS POST Diagnostics Error Messages
Check Point Description
1A Memory Refresh line has been toggled. Going to
check 15 microseconds ON/OFF time.
20 Memory Refresh period 30 microsecond test
completed. Base 64 KB memory test and address line
test about to start.
23 Base 64 KB sequential data R/W test passed. Any
setup before Interrupt vector initialize about to start.
24 Setup required before vector initialization completed.
Interrupt vector initialization about to begin.
25 Interrupt vector initialization done. Going to read I/O
port of 8042 for turbo switch (if any).
26 Input port of 8042 is read. Going to initialize global
data for turbo switch.
27 Global data initialization is over. Any initialization
before setting the video mode to be done next.
28 Initialization before setting the video mode has been
completed. Going for monochrome/color mode set-
ting.
2A Different BUSes init (system, static, output devices) to
start if present.
2B About to give control for any setup required before op-
tional video ROM check.
2C Processing before video ROM control is done. About
to look for optional video ROM and give control.